Mutable-instruments Ripples Bedienungsanleitung PDF herunterladen

Ripples

Liquid ﬁlter

Installation

Ripples requires a -12V /

+12V power supply (2x5 pin

connector). The ribbon cable

connector must be aligned

so that the red stripe of the

ribbon cable (-12V) is on the

same side of the module’s

power header as the “Red

stripe” marking on the

board.

The power consumption is:

+12V: 35 mA; -12V: 35 mA

Calibration

Adjust the trimmer on the

back of the module so that

the tone emitted by the ﬁlter

(when it self-oscillates)

tracks a 1V/oct CV sent to

the FREQ input.

Online manual

and help

The full manual can be

found online at

mutable-instruments.net/

modules/ripples/manual

For help and discussions,

head to

mutable-instruments.net/

forum/

1 2

Inhaltsverzeichnis

Seite 1 - Online manual

RipplesLiquid ﬁlterInstallationRipples requires a -12V / +12V power supply (2x5 pin connector). The ribbon cable connector must be aligned so that the

Seite 2 - Front panel

Front panelControlsA. Resonance. Ripples can be set to self-oscillate with a high resonance setting.B. Frequency. The Cutoff frequency of the ﬁlter.C.

Kommentare zu diesen Handbüchern

Keine Kommentare

Mutable-instruments Ripples Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Mutable-instruments Ripples herunter. Mutable Instruments Ripples User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Mutable-instruments Ripples